- Manuals
- Brands
- TruVision Manuals
- Digital Camera
- HD-TVI
- Installation manual
Turret camera
Hide thumbs
1
2
Table Of Contents 3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
-
- Contents
- Table of Contents
- Bookmarks
Table of Contents
-
Table of Contents
-
Product Overview
-
Package Contents
-
Camera Description
-
Installation
-
Installation Environment
-
Mounting the HD-TVI Fixed Lens Turret Camera (TVT-6101)
-
Mounting the HD-TVI VF Motorized Lens Turret Camera (TVT-6102)
-
Mounting the HD-TVI Fixed Lens Low Light Turret Camera (TVT-6103)
-
Specifications
-
Contact Information and Manuals
-
Legal and Regulatory Information
Advertisem*nt
Quick Links
Download this manual
TruVision HD-TVI Turret
Camera Installation Guide
P/N 1073683-EN • REV C • ISS 03AUG21
Table ofContents
Advertisem*nt
Table of Contents
Related Manuals for TruVision HD-TVI
-
Digital Camera TruVision S Series Installation Manual
Anpr camera (18 pages)
-
Digital Camera TruVision TVGP-P01-0201-PTZ-G Installation Manual
(37 pages)
-
Digital Camera TruVision TVPA-S01-1202-360-G Configuration Manual
360 camera (112 pages)
-
Digital Camera TruVision M Series Installation Manual
Varifocal ip turret cameras (44 pages)
-
Digital Camera TruVision TVPA-S01-0601-360-G Installation Manual
360 degree camera (35 pages)
-
Digital Camera TruVision TVF-5201 Configuration Manual
6mp and 12mp 360 camera (98 pages)
-
Digital Camera TruVision TVW-DVM Installation Manual
Wedge dome back box and dual view mount (30 pages)
-
Digital Camera TruVision TVD-CB3 Cup Base Installation Instructions Manual
(12 pages)
Summary of Contents for TruVision HD-TVI
- Page 1 TruVision HD-TVI Turret Camera Installation Guide P/N 1073683-EN • REV C • ISS 03AUG21...
-
Page 3: Table Of Contents
Mounting the HD-TVI fixed lens turret camera (TVT-6101) 16 Mounting the HD-TVI VF motorized lens turret camera (TVT-6102) 22 Mounting the HD-TVI fixed lens low light turret camera (TVT-6103) 29 Specifications 35 Contact information and manuals 36 Legal and regulatory information 37... -
Page 4: Product Overview
Product overview This is the installation guide for TruVision HD-TVI camera models: HD-TVI fixed lens turret camera: TVT-6101 (5MPx Turret, 2.8 mm lens) HD-TVI VF motorized lens turret camera: TVT-6102 (5MP Turret, 2.7 to 13.5 mm lens) HD-TVI fixed lens low light turret camera: ... -
Page 5: Package Contents
If the unit is returned, it must be shipped back in its original packaging. HD-TVI fixed lens turret camera (TVT- 6101) Camera with power • 3 screws and 3... - Page 6 • 12 VDC connector: Mounting Two terminal template connector with positive and negative indicators • Adapter plate 4 screws (PM6-32 × 10). Used to attach the turret camera to a 2 Gang electrical Installation Guide...
- Page 7 3 screws (PM4 4 screws (KM4 × 8). Used to attach x 8). Used to the turret camera attach the to the bracket turret camera to the adapter plate Installation guide Equipment disposal sheet Installation Guide...
- Page 8 HD-TVI VF motorized lens turret camera (TVT-6102) Camera with 3 screws and 3 power and anchors video output cable harness (cables not shown) 4 screws (KM4 x 4 screws (PM6- 8). Used to 32 × 10). Used to...
- Page 9 3 screws (PM4 x Adapter plate 8). Used to attach the turret camera to the adapter plate Template Installation guide • Equipment disposal sheet Installation Guide...
- Page 10 HD-TVI fixed lens low light turret camera (TVT-6103) Camera with power • 3 screws and 3 and video output anchors cable harness (cables not shown) • 12 VDC connector: Mounting Two terminal template connector with positive and negative indicators...
- Page 11 • Adapter plate 4 screws (PM6- 32 × 10). Used to attach the turret camera to a 2 Gang electrical 4 screws (KM4 × 3 screws (PM4 x 8). Used to attach 8). Used to attach the turret the turret camera to the bracket camera to the...
- Page 12 • Equipment Installation guide disposal sheet Installation Guide...
-
Page 13: Camera Description
Camera description Figure 1: HD-TVI fixed lens turret camera (TVT-6101) Trim ring 12 VDC power Housing TVI/960H analog switch button Base TVI output Lens assembly Installation Guide... - Page 14 Figure 2: HD-TVI VF motorized lens turret camera (TVT-6102) Lens assembly TVI/960H analog switch button Housing 12 VDC/24 VAC Trim ring power Base TVI output Installation Guide...
- Page 15 Figure 3: HD-TVI fixed lens low light turret camera (TVT-6103) Trim ring 12 VDC power Housing TVI/960H analog switch button Base TVI output Lens assembly Installation Guide...
-
Page 16: Installation
Installation This section provides information on how to install the cameras. Installation environment When installing your product, consider these factors: • Electrical: Install electrical wiring carefully. It should be done by qualified service personnel. Always use a proper 12 VDC UL listed Class 2 CE certified power supply or a proper 24 VAC power supply, depending on the camera. - Page 17 to + 60°C (-40 to 140°F). Humidity is below 90%. • Moisture: Do not expose the camera to rain or moisture, or try to operate it in wet areas. Turn the power off immediately if the camera is wet and ask a qualified service person for servicing.
-
Page 18: Mounting The Hd-Tvi Fixed Lens Turret Camera (Tvt-6101)
Mounting the HD-TVI fixed lens turret camera (TVT-6101) Surface mount 1. Disassemble the turret camera by rotating the trim ring, as shown below. 2. Place the provided template level against the mounting surface and mark the position of the mounting holes. - Page 19 3. Following all local safety regulations, drill and prepare the mounting and cable holes. 4. Route the cables through the cable access (if required) hole. 5. Secure the mounting base to the mounting surface with the hardware provided. Installation Guide...
- Page 20 6. Route the cables. Connect power and TVI cables. 7. Reassemble the turret camera by rotating the trim ring back in place. Installation Guide...
- Page 21 If installing the turret camera to a wall mount or other accessory, an adapter plate is provided. Install the adapter plate to the accessory with three PM4 x 8 screws, using screw holes number "2" on the adapter plate. Installation Guide...
- Page 22 8. Adjust the camera to get the best viewing angle. Installation Guide...
- Page 23 Pan position range: 0-360° P: 360° T: 0-75° R : 360° Tilt position range: Rotation position 0-75° range: 0-360° a) Hold the camera body and rotate the enclosure to adjust the pan angle P [0- 360°]. b) Move the camera body up and down to adjust the tilt angle T [0-75°].
-
Page 24: Mounting The Hd-Tvi Vf Motorized Lens Turret Camera (Tvt-6102)
Mounting the HD-TVI VF motorized lens turret camera (TVT-6102) Surface mount 1. Place the provided template level against the mounting surface and mark the position of the mounting holes. 2. Following all local safety regulations, drill and prepare the mounting holes. - Page 25 4. Route the cables through the cable access (if required) hole. 5. Secure the mounting base to the surface using the screws provided. Installation Guide...
- Page 26 If installing the turret camera to a wall mount or other accessory, an adapter plate is provided. Install the adapter plate to the accessory with three PM4 x 8 screws, using screw holes number "2" on the adapter plate. Installation Guide...
- Page 27 6. Reassemble the turret camera by rotating the trim ring back on the camera, as shown below. Installation Guide...
- Page 28 Helpful hints when mounting the turret camera: a) Mount the turret base to a surface. b) When mounting on a wall, aim the lens towards the floor and the UP marking on the camera assembly towards the ceiling. c) Place the camera eyeball assembly on two of the three standoffs of the mounting base.
- Page 29 h) Prior to completely tightening the ring, aim the camera body/lens towards the desired position. 7. Adjust the camera to get the best viewing angle (see figures below). a) Hold the camera body and rotate the enclosure to adjust the pan angle [0- 360°].
- Page 30 Pan position range: Tilt position range: 0-360° 0-75° Rotation position range: 0-360° Installation Guide...
-
Page 31: Mounting The Hd-Tvi Fixed Lens Low Light Turret Camera (Tvt-6103)
Mounting the HD-TVI fixed lens low light turret camera (TVT-6103) Surface mount 1. Disassemble the turret camera by rotating the trim ring, as shown below. 2. Place the provided template level against the mounting surface and mark the position of the mounting holes. - Page 32 3. Following all local safety regulations, drill and prepare the mounting and cable holes. 4. Route the cables through the cable access hole (if required). 5. Secure the mounting base to the mounting surface with the hardware provided. Installation Guide...
- Page 33 6. Route the cables. Connect power and TVI cables. 7. Reassemble the turret camera by rotating the trim ring back in place. Installation Guide...
- Page 34 If installing the turret camera to a wall mount or other accessory, an adapter plate is provided. Install the adapter plate to the accessory with three PM4 x 8 screws, using screw holes number "2" on the adapter plate. Installation Guide...
- Page 35 8. Adjust the camera to get the best viewing angle. Installation Guide...
- Page 36 Pan position range: 0-360° P：360° T：0-75° R ：360° Tilt position range: Rotation position 0-75° range: 0-360° a) Hold the camera body and rotate the enclosure to adjust the pan angle P [0- 360°]. b) Move the camera body up and down to adjust the tilt angle T [0-75°].
-
Page 37: Specifications
Specifications Power supply: 12 VDC / 24 VAC Current power consumption: TVT-6101: 12 VDC: Max. 480 mA, Max. 5.8 W TVT-6102: 12 VDC: Max. 880mA / 24 VAC: Max. 450 mA, Max. 10.5 W TVT-6103: 12 VDC: Max. 245 mA, Max. Weight (net): TVT-6101: 310 g / 0.68 lb. -
Page 38: Contact Information And Manuals
TVT-6102: 118.11× 135.78 mm / 4.65 × 5.35 in. TVT-6103: 97.84 × 126.7 mm / 3.85 × 5 in. Contact information and manuals For contact information and to download the latest manuals, go to the web site of your region: https://firesecurityproducts.co EMEA: Manuals are available in... -
Page 39: Legal And Regulatory Information
US and international copyright law.. Trademarks and patents: TruVision names and logos are a product brand of Aritech, a part of Carrier. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products. - Page 40 FCC compliance: Class A Class A: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
- Page 41 Products marked 2012/19/EU (WEEE directive): with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
- Page 42 Contact information EMEA: https://firesecurityproducts.com Australian/New Zealand: https://firesecurityproducts.com.au/ Product documentation Please consult the following web link to retrieve the electronic version of the product documentation. The manuals are available in several languages. Installation Guide...
This manual is also suitable for:
Tvt6101Tvt-6102Tvt-6103
